PILLAR BE-A Type 2 Socket Charging Station 7.4kW

• PILLAR BE-A
• BE-A Series
  
• 230 voltage
• BUSINESS Version
• Type 2 1P+N+E 32A 230V~ 7,4kW
• LCD 2x20 char
• RFID authentication
• NO Connectivity

EV functions

• charge in mode 3 with pwm circuit pilot
• predisposition for serial communication
• energy metering and current consumption
• identification of authorized user
• protection against direct contact Safety Child Shutters
• working in mode stand-alone free or personal
• charge managing in case of power outage
• identification of connected cord-set size
• protection against overcurrents and electric shock
• managing of lid locking and latching system

EV equipment

• 1 base with separation chamber
• 1 power supply 24Vdc 36W
• 1 fuse holder 1P+N gG 4A
• 1 DC Leakage detector
• 1 control card
• 1 stop charge push-button (mode free)
  
• 1 backup battery
• 1 lcd display 2x20 rows backlight
• 1 reader RFID 13,56MHz
• 1 modular contactor 2P 40A 24Vdc
• 1 circuit breaker 1P+N C40 30mA ist. A
• 1 digital energy meter MID 1P+N 40A
• 1 terminal strip 3x35mm²
• 1 socket located in front with RGB Led

EV excluded

• Pillar in powder paint galvanized steel with sockets located in front and illuminated with LED frame for signaling status.  
• Prepared for floor installation with basement with function of anti-condensation separation room.
• Equipped with:  1 socket Type 2 in compliance with IEC/EN 62196-2 for mode 3 charging in compliance with IEC/EN 61851-1, equipped with shutter protection (IPXXD degree of protection without any additional devides), plug latching system to avoid unintetional withdraw under load, vandal-proof lockable lid, maximum supply current 32A single-phase 230Vac (7,4kW).  
• Complete with:  Automatic and residual current device for protection against over currents and indirect contact.
• Digital meter for the measurement of the energy delivered and the control of current cosumption, MID certifided «DC Leakage» devices for detection of contiunuos earth leakage current (>=6 mA).  
• Backup batteries to ensure continuity of service in the case of power outage.  «Save Unlook» system to ensure the possibility of extracting the connector in the event of a blackout.  
• RFID reader for user identification and management of the charge, working in FREE or PERSONAL stand-alone mode.  
• LCD backlit display 2x20 character, for messages and diagnostic management with the possibility to change the language through the button.  
• Push button for display language changing and STOP to end the charge and allow plug extraction in FREE mode. 
  Set up for communication over RS485 serial line (NET mode with management via server).  
• Operating temperature -30°C to +50°C.  Impact resistance IK10.  Enclosure with IP54 degree of protection.  
• Compliant with CEI EN 61851-1, CEI EN 62196-2, CEI EN 61439-7, CEI EN 60304-7722 standards and complete with CE marking.  
• Lower part of the socket side customizable.  

Downloads: 

• Technical Sheet